BELITE IP65 outdoor 0.5w led stair light RGB 12V/24V OSRAM LED

LED:CREE/CITIZEN. 

Housing: CNC 6063# aluminum ,Matt silver/black anodized Finish or powder coated. 

Lens: Optical lens, efficiency>85%. 

Glass Cover: Tempered glass. 

Driver: Constant current output.Constant current output. 

Power Cable: H05RN-F 2*1.0MM² L=0.5M ( Low voltage). 

Operating Temperature: -20℃~40℃

Dimmable Support:Triac/PWM/0-10V/DALI/DMX512. 

Finish:Matt Silver/ Black Anodized. 

1. For Installation without mounting sleeve

1.1 Drill a hole on a decking with a thickness of 12-24mm;

      Make sure the depth inside is at least 100mm.   (See Fig 1.1)

1.2 Connect the 12/24V supply cable via waterproof junction box or connector. (See Fig 1.2)

      CAUTION: MUST USE IP67 OR IP68 JUNCTION BOX.

1.3 Connect the light fitting cable to the junction box. (See Fig 1.3)

1.4 Switch on the mains supply, check and make sure the light fitting is on.

1.5 Locate the light fitting into position securely.

2.For Installation with mounting sleeve

2.1 Recess the mounting sleeve into ground, always leave enough space under the mounting sleeve, for the

      waterproof junction box and gravel for drainage.

      The mounting sleeve is 120mm in height.   (See Fig 2.1)

2.2 Connect the 12/24V supply cable via waterproof junction box or connector. (See Fig 2.2)

      CAUTION: MUST USE IP67 OR IP68 JUNCTION BOX.

2.3 Connect the light fitting cable to the junction box. (See Fig 2.3)

2.4 Switch on the mains supply, check and make sure the light fitting is on.

2.5 Locate the light fitting into mounting sleeve securely.